JVCC DCT-44A Double-Sided Tissue Tape is a 4.7 mil thick white, non-woven tissue tape coated on both sides (AKA double-coated) with a solvent-based acrylic adhesive. This double-sided tape is wound on a siliconized 90 gr. gold glassine paper release liner. JVCC DCT-44A exhibits good permanent adhesive strength as well as good static and dynamic shear properties on most surfaces, even when heat is applied. No plasticizer migration on most surfaces. Perfect for splicing of plastic film, paper, foil, cardboard, and corrugated carton. Can also be used for general holding, joining, attaching, and laminating applications. If not otherwise specified widths shown in dropdown are in inches. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 36mm x 50m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.Technical Information- Core: 3 inch diameter neutral - Backing/Carrier: non-woven tissue - Adhesive: solvent based acrylic - Release Liner: siliconized 80 gsm gold glassine paper - Thickness: 4.7 mils (carrier, adhesive) - Adhesion: 83 ounces per inch (to stainless steel test panel) - Application Temperature: 50F to 105F - Service/Operating Temperature: -22F to 248F - Density: 62.5 pounds per cubic foot - Dynamic Shear Strength: 90 pounds per square inch